邢丽, 黄春平, 柯黎明, 肖兵. 紫铜的搅拌摩擦焊接头组织与电学性能测试[J]. 南昌航空大学学报(自然科学版), 2004, 18(4): 100-103.
引用本文: 邢丽, 黄春平, 柯黎明, 肖兵. 紫铜的搅拌摩擦焊接头组织与电学性能测试[J]. 南昌航空大学学报(自然科学版), 2004, 18(4): 100-103.
shu
XING Li, HUANG Chun-ping, KE Li-ming, XIAO Bing. The joint properties and microstructure of copper by friction stir welding[J]. Journal of nanchang hangkong university(Natural science edition), 2004, 18(4): 100-103.
Citation: XING Li, HUANG Chun-ping, KE Li-ming, XIAO Bing. The joint properties and microstructure of copper by friction stir welding[J]. Journal of nanchang hangkong university(Natural science edition), 2004, 18(4): 100-103.
shu

紫铜的搅拌摩擦焊接头组织与电学性能测试

The joint properties and microstructure of copper by friction stir welding

    摘要
  • 摘要: 本文对T2紫铜的搅拌摩擦焊工艺进行了试验研究,对接头组织和性能等进行了初步分析.试验结果表明,当焊接规范合适时,用搅拌摩擦焊方法焊接6mm厚的T2紫铜板,可得到成形美观、内部无缺陷、几乎不变形的平板对接接头.接头的力学性能试验表明,搅拌摩擦焊接头的抗拉强度可达母材的90%;电学性能试验表明,搅拌摩擦焊接头的电阻率与母材基本相当.

     

    Abstract: This paper studied the feasibility of friction stir welding(FSW)for joining of copper, the welding process.Joint microstructure and properties of copper were analyzed.The results showed that defect free weld was produced on 6mm thick copper plate at optimum joining conditions.Besides, the experiment indicated that transverse tensile strength of FSW copper joint reached about 90% of that of the base metal and conductivity of the joint was approximately equal to that of the base metal.

     

    • HTML全文
    • 参考文献(3)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回