潘晶, 徐志锋, 姜俊华, 汪生梅, 周善民. 30CrMnSiA钢管外圆磁力研磨工艺的研究[J]. 南昌航空大学学报(自然科学版), 2000, 14(3): 13-15.
引用本文: 潘晶, 徐志锋, 姜俊华, 汪生梅, 周善民. 30CrMnSiA钢管外圆磁力研磨工艺的研究[J]. 南昌航空大学学报(自然科学版), 2000, 14(3): 13-15.
shu
Pan Jin, Xu Zhi-fen, Jiang Jun-hua, Wang Sheng-mei, Zhou Shan-min. Research on the Magnetic Abraive Finishing of 30CrMnSiA Circular Tubes[J]. Journal of nanchang hangkong university(Natural science edition), 2000, 14(3): 13-15.
Citation: Pan Jin, Xu Zhi-fen, Jiang Jun-hua, Wang Sheng-mei, Zhou Shan-min. Research on the Magnetic Abraive Finishing of 30CrMnSiA Circular Tubes[J]. Journal of nanchang hangkong university(Natural science edition), 2000, 14(3): 13-15.
shu

30CrMnSiA钢管外圆磁力研磨工艺的研究

Research on the Magnetic Abraive Finishing of 30CrMnSiA Circular Tubes

    摘要
  • 摘要: 采用化学粘结Fe+SiC磁性磨料对30CrMnSiA钢管外圆进行磁力研磨试验,研究了磨料成分、粒度以及研磨时间与研磨后表面粗糙度的关系.试验所得到的研磨表面粗糙度达到了Ra0.05μm.

     

    Abstract: The test of magnetic abrasive finishing on 30CrMnSiA Circular tube was carried out with the felted Fe+SiC Magnetic abrasive powders,and the relationship between the content,granule size of felted Fe+SiC Magnetic abrasive powders,processing time and the surface roughness of the piece are investigated.In this test,the surface roughness Ra 0.05μm was got.

     

    • HTML全文
    • 参考文献(2)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回