马银平, 王琦, 曹慧兰. 开放式电火花线切割机床CNC系统的设计[J]. 南昌航空大学学报(自然科学版), 2002, 16(3): 73-75.
引用本文: 马银平, 王琦, 曹慧兰. 开放式电火花线切割机床CNC系统的设计[J]. 南昌航空大学学报(自然科学版), 2002, 16(3): 73-75.
shu
MA Yin-ping, WANG Qi, CAO Hui-lan. The design of CNC system for WEDM based on open system architecture[J]. Journal of nanchang hangkong university(Natural science edition), 2002, 16(3): 73-75.
Citation: MA Yin-ping, WANG Qi, CAO Hui-lan. The design of CNC system for WEDM based on open system architecture[J]. Journal of nanchang hangkong university(Natural science edition), 2002, 16(3): 73-75.
shu

开放式电火花线切割机床CNC系统的设计

The design of CNC system for WEDM based on open system architecture

    摘要
  • 摘要: 本文基于开放式结构,设计了一个电火花线切割实验CNC系统4_AWED,并在系统数据信息流程和通用模块的设计中采用了开放式体系结构的设计思想.

     

    Abstract: On the basis of open system architecture,a CNC system for wire-cut electric discharge machine has been designed. The idea of open system architecture is also adopted in the data process and design of current module.

     

    • HTML全文
    • 参考文献(5)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回