刘志和, 孙卫和. 凸缘外周带压力的充液拉延工艺的研究[J]. 南昌航空大学学报(自然科学版), 1996, 10(2): 16-21.
引用本文: 刘志和, 孙卫和. 凸缘外周带压力的充液拉延工艺的研究[J]. 南昌航空大学学报(自然科学版), 1996, 10(2): 16-21.
shu
Liu Zhihe, Sun Weihe. The Study on Hydraulic Mechanical Draning With Radial Pressure[J]. Journal of nanchang hangkong university(Natural science edition), 1996, 10(2): 16-21.
Citation: Liu Zhihe, Sun Weihe. The Study on Hydraulic Mechanical Draning With Radial Pressure[J]. Journal of nanchang hangkong university(Natural science edition), 1996, 10(2): 16-21.
shu

凸缘外周带压力的充液拉延工艺的研究

The Study on Hydraulic Mechanical Draning With Radial Pressure

    摘要
  • 摘要: 本文论述了一种凸缘外周带压力的充液拉延方法,试验表明,在合适的工艺参数下,采用这种成形方法,可以获得比常规钢模拉延小得多的拉延系数.

     

    Abstract: This paper described a method of hydrardic Mechanical drawing with radial pressure The test shaus that a much smaller drawing coefficient than that of her enalsheel mould drawing can be obtained by this method with proper rprocess parameters.

     

    • HTML全文
    • 参考文献(4)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回