李明, 杨拥. 按传动角要求设计曲柄摇杆机构的解析法[J]. 南昌航空大学学报(自然科学版), 2001, 15(4): 23-25.
引用本文: 李明, 杨拥. 按传动角要求设计曲柄摇杆机构的解析法[J]. 南昌航空大学学报(自然科学版), 2001, 15(4): 23-25.
shu
Li Ming, Yang Yong. Analytical Methodof Designinga Crank-and-Rocker Mechanism according to the Transmission Angle[J]. Journal of nanchang hangkong university(Natural science edition), 2001, 15(4): 23-25.
Citation: Li Ming, Yang Yong. Analytical Methodof Designinga Crank-and-Rocker Mechanism according to the Transmission Angle[J]. Journal of nanchang hangkong university(Natural science edition), 2001, 15(4): 23-25.
shu

按传动角要求设计曲柄摇杆机构的解析法

Analytical Methodof Designinga Crank-and-Rocker Mechanism according to the Transmission Angle

    摘要
  • 摘要: 本文提出的按行程速比系数K、摇杆摆角ψ和许用传动角γ等条件作为基本参数设计曲柄摇杆机构的解析法,可满足机构的运动精度和传动质量要求,因而具有较强的实用性.

     

    Abstract: In this paper,an analytical method for designing a crank-and-rocker mechanism using Time Ratio(K),swing angle of the rocker(ψ)and allowable transmission angle γ as basic parameters is given.This method can meet the requirement of the movement accuracy and the transmission quality,and make designing more practical.

     

    • HTML全文
    • 参考文献(4)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回